How To Fix ‘DNS_Probe_Finished_Bad_Config’ Error

Have you ever seen a DNS_Probe_Finished_Bad_ConfigĀ error while exploring the web for something? If you use Google Chrome as your default browser, you’re more likely to run into this issue.

This is a DNS (Domain Name System) issue that many individuals have encountered while searching the internet for anything. Some faults in the web browser are to blame for the DNS issue.

These flaws prevent users from accessing a website, and the browser shows an error message on the screen. When you try to access a website and it is unavailable, you may encounter a DNS error.

How To

The error is most commonly encountered in the Google Chrome browser, although it can also occur in a variety of other browsers. We’ll go over a few different ways to repair this problem in this article.

Read Also:

  1. 0xC0000142
  2. IDP.Generic
  3. System Service Exception

How to Resolve the DNS_Probe_Finished_Bad_Config

The DNS_Probe_Finished_Bad_Config error can be caused by a variety of factors. It could be a combination of minor and major network troubles, as well as malicious files in the system. But there’s no need to be concerned.

Whenever a new error occurs, we try a variety of approaches to correct it. We’ll learn about the several effective and simple solutions for resolving this problem, as well as the precautions we should take before using them.

Method 1: Manually configure DNS

This is a very successful method for correcting this problem, and it is also recommended by several specialists. Steps:

Step 1: Go to the Network and Sharing Center in the Control Panel.

Step 2: Select Change Adapter Settings from the drop-down menu. Click on the Properties button after selecting Local Area Connection (LAN).

Step 3: Select Internet Protocol Version 4 (TCP/IPv4) from the Properties menu.

Step 4: Use the Following DNS Addresses as an option. Click OK after entering the addresses of the DNS server you want to use.

Step 5: In the Preferred address field, type, and in the Alternate address bar, type

Step 6: When you’re ready to go, select Validate settings. Then press the OK button.

Step 7: Finally, restart the machine to see if any errors, such as Unidentified Network No Internet Access, appear in Windows.

Once you have manually set the DNS, the DNS_Probe_Finished_Bad_Config Error will not appear on your screen. There are other advantages to manually configuring DNS. This method can be used to block and unblock a large number of websites.

It can also protect you against phishing assaults and other types of threats. It also improves browsing performance. All you have to do now is pick a DNS service carefully. If this approach doesn’t work and you’re still having problems, you can try the other options listed below.

Method 2: Reset IP Configuration

Another source of the DNS_Probe_Finished_Bad_Config Issue is incorrect IP configuration. As a result, resetting the IP Configuration is another option for resolving this problem.

The steps to reset the IP Configuration are as follows:

Step 1: To open the Run dialogue box, click on the Start button.

Step 2: In the run command, type “cmd“. After that, hit the enter key.

Step 3: Once the command window has opened, type the following commands one by one.

int ip reset netsh

reset winsock netsh



Step 4: Once you’ve finished inputting the commands, restart the computer.

The DNS_Probe_Finished_Bad_Config problem will be resolved after using this approach, as well as your surfing speed. However, if the problem has not yet been resolved, you might try the alternative ways listed below.

Method 3: Clear Cookies, Cache, and Temporary Files

DNS_Probe_Finished_Bad_Config errors can also be caused by cookies, caches, and temporary files. This method is relatively simple to implement. It goes without saying that if your system is clogged with garbage files, it will grow ill.

To resolve this problem, remove your computer’s cookies, caches, and temporary files.

The following are the measures to take:

Step 1: To check the caches and cookies, press the Ctrl+Shift+Del keys simultaneously.

Step 2: After that, select Clear data to clear all cookies, caches, and temporary files.

Close and reopen the browser once you’ve cleared all of the garbage files, and the error will be gone. Cookies and caches slow down your browser and have an impact on your system as well.

Nowadays, we utilize smartphones, and we can run into the same issue if our phone’s caches and cookies are full. Clearing caches and cookies on a regular basis is necessary for seamless browsing. It is a simple and effective method of resolving this issue.

Method 4: Update Network Drivers

To avoid this type of mistake, it’s critical to keep your software up to date. For a variety of reasons, many people do not wish to update the software on a regular basis.

They are unaware, however, that when any software is updated, the developers strive to eliminate all defects in order to improve the product’s performance. Because the problem is caused by a bug, resolving the defect by updating the network drivers will resolve the issue.

To accomplish the same, follow these steps:

Step 1: Press the Windows key and the X key at the same time. Activate Device Manager.

Step 2: If you find any updates for the drivers, install them.

Step 3: Restart the computer once the update is complete.

All bugs should be gone once you update the drivers, and if the error was caused by an old driver, the problem should be resolved after the update. However, if the error persists even after the update, you can try the alternative solutions listed below.

Method 5: Disable Firewall and Antivirus Programs

To safeguard our system, we utilize firewall and antivirus software, although these programs might occasionally cause problems. This is because they try to defend the system from anything odd they uncover.

Similarly, they will block a website if they discover anything suspect about it. To address the problem, turn off the firewall and antivirus software. Now, if you’re concerned about the dangers of turning off the firewall and antivirus, you’re perfectly correct.

Your system becomes open to attacks if you disable the firewall and antivirus software. When you turn off the Firewall, all of your system’s data packages are given access to enter and depart the network without restriction.

As a result, removing a firewall permits viruses to enter the system and offers crooks the ability to remotely execute harmful code.

As a result, you must be extremely cautious about whatever websites you visit after disabling the Firewall. Once you’ve fixed the issue with this procedure, you should try to secure your PC with different antivirus.

Method 6: Disconnect and Reconnect to the Network

The error can also occur if your LAN’s router is malfunctioning. As a result, the strategy only works if the router is malfunctioning. You can remedy this problem by disconnecting and reconnecting to the network, however, this will only work if the problem was caused by your LAN’s router.

Follow the instructions below to repair your router:

Step 1: From the taskbar, click on the Internet icon.

Step 2: Select the network to which the network is connected and disconnect it. Check to see if any errors, such as DNS Server Not Responding, occur.

Step 3: Finally, turn off the router and then turn it back on after a few minutes. Connect your PC to your router once it has been turned on.

If there had been a problem with the router, the DNS_Probe_Finished_Bad_Config error would have been resolved. Furthermore, by disconnecting and rejoining your router, you can improve the speed of your internet connection.

You can also update your router’s firmware. As previously said, developers repair bugs every time they release a new version of the software or a system. You may upgrade the firmware on your router by going to the manufacturer’s website.

Method 7: Using a Different Browser

If you’ve tried all of the solutions listed above and are still having problems, you might want to try switching browsers. The problem is frequently caused by the browser itself. Check to see if Err Network Changed is displayed in your Google Chrome browser.

If you’re having trouble opening a web page in Google Chrome, try opening it in another browser. Many users have encountered this type of problem as a result of their browser, with the mistake occurring most frequently on Google Chrome.

If none of the previous techniques are working, you can change your web browser. On the internet and in app stores, there are a plethora of various browsers to choose from. Until the DNS_Probe_Finished_Bad_Config issue is addressed, try a different web browser.

You can wait for your browser to update.

Read Also:

  1. CTF Loader
  3. Service Host Local System High Disk


These approaches, which we described throughout the post, were among the simplest and most effective for resolving the DNS_Probe_Finished_Bad_Config problem. In this article, we attempted to present all of the effective solutions for resolving this problem.

Try each method one at a time until you find the proper solution to this problem. You’ll find at least one of these methods beneficial. There are a variety of additional approaches for resolving this problem, but these were the most common and effective.

However, you should exercise caution before implementing these approaches, as you have seen, there are various risks of cyberattacks. Before you begin attempting to repair a mistake, make sure you have a complete backup of your system’s data.